The machine is a free standing unit built sturdily.
The broach is mounted in a carrier, which is drawn by a twin lead
screw mechanism through the full stroke with the help of 0.5 HP motor.
V/U notch Broaching Machine fixture to clamp the specimen. The
tooling includes the vice for holding the 10mm X 10mm
specimen. The tooling / fixtures include the adjustors & the end stop
necessary to ensure the notch depth & position accurately as per the
The approx. weight is around 100 kg.
The machine dimension (approx.) 385mm X 385mm X 1050mm.
The machine will broach a notch in 10 mm square material to the
A.S.T.M.A 370, E23
DIN 50 115
B.S. 131 : Part I, II, III, IV
BS EN 10045 - 1993
IS 1598 1977, IS 1757 1988, IS 1499 1977
Manual Model Broaching Machine
( Hand Operated )
Notch Broaching machine suitable for ferrous & non-ferrous material for sample preparation of 'V' & 'U' notches for Impact Testing Machine. Notch Broaching Machine can cut correct 'U' & 'V' notches in Charpy or Izod specimen by means of multi-toothed broach
Robustly constructed machine cuts the notches by means of a
specially designed multi-toothed broach, which is drawn across the
specimen by self - push of rotating hand wheel.
A simple hand-vice for holding the specimen is built on to the machine. The tooling includes the adjustors & end stop necessary to
ensure that notch-depth & positions are correctly set.
The approx. weight is around 35 kg.
The machine dimension (Approx.) 210mm X 210mm X 1050mm.